window being replaced

How to pick out window replacements

What kind of measuring and marking do I need for window replacement?

So you think it may be time for replacement windows, but you’re not sure what kind you need, how much they will cost or even what brand or company you should choose. There are many factors that determine the cost of replacement windows. When you decide it’s time to get the answers you need on window construction and installation, it’s best to call an expert for more information. If you are in the Middle Tennessee area you could try Zen Windows Nashville for Window Replacement Middle Tennessee. If you are not in that area you could just do a local search for replacement windows.

A reputable window company should never charge for an estimate. If you have a small job many times they will quote over the phone or if you have the details they may be able to provide an estimate on the spot but in many cases you will need to have a free in home window replacement estimate.

You may be surprised to know that all windows aren’t created equally. There are differences in material, glass, frame types and hardware between the most common window brands. If you do find a reputable glass company near you then there should be no issue with the quality.

How do I find out the cost for replacing my windows?

Calculating the cost of replacement windows can be tricky, as there are many factors that contribute to the final expense. Do your best to have as many details as possible if you want to get multiple quotes quick. You can also just schedule a time for a free in home estimate and they can offer you more detailed answers.

While the expense of replacement windows can be substantial, it is an investment that will increase the value and comfort of your home. Below are some factors that may impact the cost of your replacement windows.

Wood Windows Benefits and Negatives

While wood windows are sometimes perceived as higher quality, they are generally more expensive. The regular maintenance required on wood windows is substantial, not to mention they are prone to rot. The quality of vinyl replacement windows is substantially better than years past and can be a cost-effective and a reliable alternative to expensive wood or composite windows.

Energy-Efficient Replacement Windows

Another consideration when purchasing replacement windows is the grade of energy efficiency. Experts estimate that 70 percent of energy loss in your home occurs through doors and windows, and 90 percent of window heat loss occurs through the glass. If your new windows aren’t energy efficient, all the money you’re spending to heat and cool your home could literally be going out the window.

11 Steps To Replacing Your Old Windows At Home On Your Own

How to Replace your old windows at home

Are you ready to throw your old, rotting window out and install a replacement? Here are a few tips that can give you a breezy and inexpensive DIY window installation.

tools for replacing old windows

1. Grab the Right Equipment

To mention a few, here is a list of tools that will help from start to finish:

  • Caulk Gun
  • Crowbar
  • Hammer
  • Insulator / Foam
  • Sealant
  • Tape measure

2. Measure

To start, measure the width, length and height of the old window so you can get the right size from the store. Leave the window open but be mindful of debris that may fall out.

3. Pull The Stops

Pull the Stops off slowly with a crowbar to expose the sash. If you are reusing these stops, be careful not to crack or damage them.

4. Use That Crowbar

With the stops out of the way, insert the crowbar into the tracks or guide where the sash slides up and down. Pull both of the sides out and once they’re loose, grab the sash with your hands and slowly bring it down.

If this task has started to look a bit daunting to you then you might want to find a window replacement specialist from a glass company specialist near you.

hammering a nail in a wood board

5. Pull The Hooks

Once the sash is out, you’ll find strings situated at the top part of the window, go ahead and pull them out along with their hooks.

6. Again

Repeat the same process. There should be another line of stops and upper sash that needs to be removed. Be careful not to damage the window frame where the replacement window will sit.

7. Clean Up

Now that you have everything out clear the frame from nails, hooks, or any debris that can get in the way during installation of the replacement window.

8. Seal

Seal the back of the front stops using a caulk gun. While holding it in a 45-degree angle, squeeze the trigger as you run the gun along the back of the stop. Let it dry for a few minutes.

9. Insulation

The top of your window will come with an expander. Before putting this in place, run the insulating foam and stick it to the top of the window. Any large holes in the window frame should be insulated too.

10. Replace It

Now it’s time to bring the replacement window up. Situate the bottom ahead of the rest and push it into place. Make sure the new sashes slide up and down correctly. Screw it tightly and run the sealant on the sides.

11. Finale

Return the old stops and nail them into place. After which, seal the sides, and you’re done.

cleaning glass in a window frame

Good luck!